Search in Category
Vehicle Detection and Loops
Filter Your Search
Brand
Shop by Category
Loading...
Vehicle Detection and Loops
Vehicle Detection and Loops
Viewing Page 1 of 1
(9 results)
LOOPDETLM
Loop Detector-Plug In 12VDC/3mA
Plug-in connector; No wiring needed. 12VDC/3mA low power draw, Includes Diagnostic and test feature. Prevents the gate from closing on a vehicle in the path. Power Efficient for maximum cycles on Battery Backup.
Supplier:
LiftMaster
Supplier Part #:
LOOPDETLM
NP2ESL
Detector, 10/30V AC/DC Low Draw
Extremely Small Form Factor, 4 Selectable Sensitivities, 4 Selectable Frequencies, Wrong Voltage Protection, Automatic Sensitivity Boost, Selectable Presence Times, Selectable Fail Safe/Fail Secure Option, Separate Power/Fault and Detect Indicators
Supplier:
Northstar Controls
NP2ES
Plug-in Loop Detector, 12-24VDC
4 Selectable Sensitivities, 4 Selectable Frequencies, Wrong Voltage Protection, Separate Power/Fault and Detect Indicators, Automatic Sensitivity Boost, Power Supply Requirement 10 to 30 Volts DC, 5mA nominal, Selectable Presence Times, Perm. Pres. Option
Supplier:
Northstar Controls
Supplier Part #:
NP2-ES
DSP-19
Loop and Mini-Loop Detector 8-35Volts DC
Less than 1ma of current draw in the non-detect state. Can be connected to a standard inductive loop as well as Diablo Controls mini loops. Single Solid State Open-Drain output that can sink over 250 milliamps.Front switch selectable.
Supplier:
Diablo Controls, Inc.
Supplier Part #:
DSP-19
DSP-22-2
Det. Plug in Dual Channel-DK Compatible
Very low power. Typically draws less than 2 milliamps. Advanced technology with superior noise tolerance. Selectable Presence or Pulse operation for channel 2. 4 selectable sensitivity settings and sensitivity boost allow for a wide range of uses.
Supplier:
Diablo Controls, Inc.
Supplier Part #:
DSP-22-2
DSP-15 LVT
Det-Single Ch. Dual Relay w/Timing-
Single Channel Dual Relay Output with Timing - W/Terminal Strip
Supplier:
Diablo Controls, Inc.
Supplier Part #:
DSP-15-LVT
DSP-22-1
Det. Plug in Single Channel-DK compatibl
Supplier:
Diablo Controls, Inc.
Supplier Part #:
DSP-22-1
